Wall construction process of resin decorated panel

Resin decorative panel, pure hand-made products, has a clear sense of surface layers and strong three-dimensional sense, which can meet the needs of different environments. It is widely used in various surface decoration, especially wall decoration in different places. What kind of process is the installation method of resin panel wall? Let's get to know.

Resin board wall installation step 1: find and line

Before installing the resin board, according to the requirements of the design drawings, find the elevation, plane position, vertical dimension, and execute the elastic line.

Resin board wall installation step 2: check inserts and openings

Check whether the embedded wood wedge meets the design and installation requirements after the elastic line, mainly check whether the arrangement spacing, size and position meet the requirements of nail plate bottom plate; measure the position and size of doors and windows and other openings, and check whether the square is vertical and meets the design requirements.

Resin board wall installation step 3: paving, damp proof coating

The design of the wall has moisture-proof requirements. The resin film should be pressed when nailing the bottom plate, or the moisture-proof layer should be applied before nailing the keel.

Resin board wall installation step 4: preparation and installation of bottom plate

According to the position of the reserved wooden wedge, the bottom plate shall be positioned and nailed firmly. When design is not required, the base plate spacing is usually 500 mm. All incoming panels are placed in the same room before use. Select the number of adjacent components so that the pattern and color are approximately the same after installation.

Resin board wall installation step 5: cutting board preparation

According to the scale of keel, mark the board on the board. It is strictly forbidden to plan the board surface, and the small surface must be straight. When the panel fits with the butt joint, it must be considered that the joint is on the bottom plate.

Resin board wall installation step 6: resin veneer installation

Before installing the resin decorative panel, check the position of the bottom plate, flatness, nail tightness, moisture-proof structure requirements, etc., and install after passing the test. After assembling the panel, assemble the panel, panel size, joint and joint configuration. Pattern orientation and color perception are acceptable, and mounting panels can be performed, and joints should be glued to the base plate.